Cabinet painting
Painter in Oakville — Cabinets Sprayed in 2K, Never Brushed
Cabinet painting done properly. Doors, drawer fronts and anything else that comes off go into our spray booth and come back with a 2K polyurethane finish. No brush marks, no roller texture.
2K
Polyurethane finish, not house paint
100+
Kitchens completed
25 years
In the trade, and here since 2013
5.0
Rated on Google
Start here
What cabinet painting actually is
Painting cabinets is not painting walls. The doors and drawer fronts come off and go to our spray booth; the frames are prepared and finished in your kitchen behind full masking. What goes on is 2K polyurethane — two-component, catalysed, the system high-end furniture manufacturers and automotive refinishers use. It cures hard, shrugs off kitchen cleaners, and does not yellow the way a water-based finish does.
It costs more in materials than a tin of cabinet enamel, and it is worth it after a few years of daily use. That is the whole argument for doing this properly rather than cheaply.
It suits a kitchen where the boxes and the door profiles are still sound and only the colour has dated. If the doors themselves are the problem — the style, the damage, the way the room is laid out — painting puts a good finish on the wrong thing, and refacing is the better answer. We will tell you that at the consultation rather than after the deposit.
How we work
What actually happens to your doors
The disruptive part is short because the slow part happens at our shop, not in your house.
-
Step one
Doors come off
Doors and drawer fronts are labelled, removed and taken to the shop, and you choose the colour from painted samples on the day. For the fortnight they are away you keep a working, doorless kitchen — boxes, sink and appliances all in use.
-
Step two
Filled and sanded
Dents, chips and old caulk gaps filled, then sanded and primed. A smooth finish amplifies a flaw rather than hiding it.
-
Step three
Checked under the booth lighting
The booth is lit low across the surface, which shows what a ceiling light hides. Anything it finds goes back a step.
-
Step four
Sprayed and cured
Two-component polyurethane, sprayed in the booth and left to cure properly rather than rushed back.
-
Step five
Frames sprayed, then refit
The frames are sprayed in your kitchen behind sealed containment, and we ask you out of the house for those two or three days because the finish is solvent-based. Then fronts rehung, every door aligned and every closer tested. About five days, and the kitchen is yours again that evening.
The real choice
Doors in a booth, or doors sprayed at your house
Everyone sprays cabinets. Where the doors get sprayed is what separates the results.
| Aspect | Doors in our booth | Doors sprayed at your house |
|---|---|---|
| Where the doors are finished | Off the hinges and into our spray booth. | On the hinges, or laid out somewhere in your house. |
| Dust in the finish | A controlled room. Nothing settles on a wet surface. | Whatever is in the air that day settles on a wet surface. |
| Cure conditions | Temperature and humidity held steady, so the finish flows and cures as intended. | At the mercy of an Oakville shoulder season that swings 15 degrees in a day. |
| Overspray | Stays in the booth. Your counters and appliances never meet it. | Travels. Masking is the only thing between it and your granite. |
| Finish system | 2K polyurethane — catalysed, cures hard, does not yellow. | Usually a water-based cabinet enamel, because a booth-grade system needs a booth. |
| Cabinet frames | Sprayed in your kitchen either way — ours behind zipper walls and HEPA filtration, in the same 2K as the doors. | Sprayed in your kitchen behind whatever masking came out of the van that morning. |
Recent work
Cabinet painting in Oakville, before and after
Sprayed, not brushed. Same doors, new finish.
Before
After
Before
After
Before
After
Before
After
Before
After
Before
After
Before
After
Before
After
Before
After
Before
After
Before
After
Before
After
Before
After
Before
After
Before
After
Before
After
Before
After
Before
After Walk through one
The Clearview kitchen, finished
The stills above are framed and chosen. Walking the room shows the finish across a whole run, which is the thing a single photograph cannot settle.
The Clearview kitchen from the gallery above, filmed once everything was back on.
What is worth noticing is everything that did not change. The granite, the tiled backsplash, the tile floor, the island with its wine lattice, the panelled fridge and the wall ovens are all the ones that were there before. The doors are the same doors — same raised panel, same layout — sprayed rather than replaced.
That is the whole argument for painting over replacing. The parts of a kitchen that cost the most and last the longest are usually fine. It is the colour that has dated.
Choosing the colour
We bring the colour to your kitchen
Samples on your own doors, in your own light, before a drop is sprayed.
100+ kitchens finished across Oakville and Halton
We come to you. Painted samples go on your own doors, against your floors and the light the kitchen actually gets, and the colour is chosen there rather than off a chip under shop lighting.
- Painted samples on your own doors, in your own light
- Your written quote already in hand, and it does not change after the visit
- Options for what to change and what to leave alone
- No charge, no deposit taken on the day
We recently had our dark kitchen cabinets painted white, and the transformation is incredible… Nick was also a huge help when it came to choosing the exact colour and picking out the handles.
Nick took the time in helping me decide on a paint color since I was going away from the norm. They were very professional from start to finish.
The quality of the work was excellent, the team was professional and efficient, and the finished product completely refreshed the look of our kitchen.
5.0 on Google · read them on our profile
What we do
Cabinet painting services in Oakville
Kitchen Cabinet Painting
This is our busiest service. By a lot. We spray your existing cabinet boxes and doors with a professional 2K polyurethane finish, the same system used in high-end furniture manufacturing, so the result looks and holds up like factory cabinetry. Most Oakville homeowners are genuinely surprised when they see how different it looks from standard painted cabinets. It's not subtle. Where the boxes are sound, painting cabinet doors instead of replacing them is the cheapest route to a kitchen that reads as new.
Spray Painting for a Factory-Smooth Finish
When people in Oakville want a finish that looks like it came off a factory line, spraying rather than brushing or rolling is the only way to get there. Brush and roller leave marks. Always. Spray atomizes the paint into a fine mist that settles in an even, consistent layer with no brush strokes, no roller texture, no lap lines. The surface comes out smooth and flat in a way that brush work just can't replicate.
Color Consultation on Your Own Doors
Picking the wrong colour is a real thing. It happens more than you'd think. We walk you through physical painted samples right in your Oakville kitchen so you can see how a colour actually looks in your own kitchen light before anything gets sprayed. Your phone screen and a paint chip under fluorescent store lighting are not the same as a real sample on your actual cabinet door, at 7pm when you're cooking dinner. We've had clients completely change their choice after seeing the sample on-site. That's the point.
Wood Staining for Staircases, Trim, and Built-Ins
The same spray booth and 2K finish that goes on cabinets handles bare wood too.
Wood staining lets the grain do the talking. We strip the old finish, apply your chosen stain tone, then seal everything with the same 2K polyurethane we use on cabinets. The result looks rich and intentional, not painted over. This comes up a lot with staircases in older Oakville homes where the original oak has sat under a thick varnish for 20 years. stripping it back and restaining in walnut or grey-brown makes it look like a different house, and it holds up to foot traffic because of the finish we seal it with.
Wood Painting for Trim, Doors, and Millwork
Once the cabinets are done, the trim beside them is usually what dates the room.
Trim is the one place we do not spray everything. What can be taken off goes to the booth with the doors. What is fixed to the wall — casings, baseboards, a stair rail — is finished in place, and on some of those a fine brush lays down better than a sprayer masked into a corner. Cabinets are always sprayed; trim gets whichever of the two suits the surface.
Prep is the whole game here. Older homes in Old Oakville, Bronte Village, and West Oak Trails often have original wood trim that's been painted over multiple times. Decades of layers, minor dents, nail holes, caulk gaps. Before any new paint goes on, we clean, sand, fill, and prime, because preparing trim that has been painted over for decades is most of the work. Skip those steps and you'll see every flaw in the final coat — trim and doors get viewed up close at eye level, so there's nowhere to hide.
All of it
Every cabinet painting service we offer in Oakville
-
Doors sprayed in our booth, frames sprayed in your kitchen, both in 2K polyurethane.
-
Trim, doors and millwork sprayed to match the cabinets rather than brushed by hand.
-
The old finish taken off completely so new stain reaches the timber itself.
-
Your existing doors degreased, sanded and sprayed a new colour, with no brush marks.
-
Real sample doors brought to your kitchen and seen in your own light. No charge for it.
Where we work
Where we work
Most of our work is in Oakville and within about twenty minutes of it — Bronte, Old Oakville, River Oaks, West Oak Trails and Bronte Village. We keep finding cabinets in Oakville homes that are solid and structurally fine and have simply dated, and a sprayed finish changes that for a fraction of what new cabinets cost.
The older streets are a different job again. Original wood trim in those houses has usually been painted over several times — decades of layers, minor dents, nail holes, caulk gaps — and that prep is most of the work.
Burlington, Milton and Hamilton are all within our service area, and the same booth and the same 2K system apply there.
Spraying is one of three ways to change a kitchen
Spraying changes the colour and the surface and leaves everything else exactly as it is. That is the right answer surprisingly often, and the wrong one when the door profile is what you dislike or the boxes have failed. Seeing the other ways a kitchen gets changed side by side — what each costs, how long each takes, and which kitchens each suits — is easier on one page than across four, and that comparison is what the kitchen remodeling page above this one is for.
Why us
Why Oakville homeowners choose us for cabinet painting
- 2K polyurethane, not house paint
- A catalysed two-component system, the same class of finish used on high-end furniture and in automotive refinishing. It cures hard, resists kitchen cleaners and cooking grease, and does not yellow with age the way water-based enamels do.
- Sprayed only — we do not brush or roller cabinets
- There is no cheaper option offered here, because brush and roller marks would undo the material. Every door, drawer front and frame is sprayed, which is the only way to get a surface with no strokes, no stipple and no lap lines.
- Our own degreaser, because TSP cannot lift wax
- Most cabinet painters clean with TSP, which is water-based. It cannot cut years of furniture polish, and it swells solid wood and raises the grain. Ours is a modified solvent degreaser that removes what would otherwise sit under the finish and let go of it later.
- A booth, not a garage
- Doors and anything else that comes off are finished in a proper spray booth with filtration and controlled conditions, then returned and hung. What has to stay on the wall is sprayed in your kitchen behind full containment.
Book it
Find out what painting your cabinets costs
Send wide photographs of each run of cabinet and you will have a written quote inside 24 hours, which we do not revise afterwards.
Questions
Common questions about cabinet painting in Oakville
- How do I know if I need cabinet painting or full cabinet replacement?
- If your cabinet boxes are solid and the doors close properly, painting is almost always the better call. Replacement costs far more and takes much longer. Whether yours qualify is a question about the boxes rather than the age of the kitchen, and photographs usually answer it. Where they do qualify, a professional spray finish transforms them completely for a fraction of the replacement cost.
- What is the difference between spray painting and brush painting for cabinets?
- Spray painting gives you a smooth, factory-like finish that brush and roller simply cannot match. Brushes and rollers always leave texture behind. Spray atomizes the paint into a fine, even layer with no stroke marks. For cabinets, trim, or doors where you want a clean, professional result, spray is the right choice.
- Do Oakville's humid summers and cold winters affect a paint job?
- They affect how a finish is applied more than how long it lasts, and the booth is most of the answer. Doors and drawer fronts are sprayed in a climate-controlled room, so humidity and temperature never touch the cure — a finish sprayed in February comes out the same as one sprayed in July. The 2K polyurethane itself is catalysed rather than air-dried, so it hardens by chemical reaction instead of by evaporation, and it does not soften, chalk or yellow the way a water-based enamel does with age.
- How do I choose the right paint colour before committing to a full cabinet or trim project?
- Ask whoever is quoting the job to bring physical samples to your home. Store chips under fluorescent lighting and phone screens both lie. Seeing a real painted sample on your actual cabinet door, in your kitchen light, at different times of day is the only reliable way to choose. We have had clients completely change their colour choice after an on-site sample visit.
- How soon can I use the kitchen after the cabinets are sprayed?
- Straight away. Doors and drawer fronts are sprayed at the shop and only come back once the finish has hardened, and for the fortnight they are away you keep a working, doorless kitchen. The frames are sprayed in your house at the end, and we ask you to be out for those couple of days. After the walkthrough the finish is cured — load the cupboards the same evening, no being gentle with it.
- Does your painting service cover all of Oakville, including newer neighbourhoods like River Oaks and West Oak Trails?
- Yes, we work throughout Oakville, including Glen Abbey, River Oaks, West Oak Trails, Bronte, and Old Oakville. Whether your home is a newer build or an older property with original wood trim, we come to you for consultation and prep work. Spray finishing is done in our booth, in a controlled environment rather than in your kitchen.
Ready to see the colour on your own doors?
Send photographs of your kitchen and you will have a written quote inside 24 hours, which we do not revise later. Physical samples come to your kitchen when the doors come off, so the colour is chosen on your own doors in your own light rather than off a chip in a shop.
Free in-home consultation · no obligation